ATTENTION: THIS IS NOT LOADED AMMUNITION

What is "Demil/Pull Down" Ammunition?
"Demil" or "Pull Down" refers to the disassembly of previously loaded ammunition. The projectiles and brass are new components that were once loaded but later disassembled for various reasons. After disassembly, they go through a sorting process that is about 95% accurate, with extra product included to account for possible errors.

Pulled Projectiles

• May have marks from the pull-down process.
• Minimal marks = Light to no visible marks.
• Heavy marks = Possible shape distortion at the ogive.
• Some may have crimp marks, but damaged projectiles (e.g., over-crimped) are removed.

Pulled Brass

• May have small dents, scratches, or deformed case mouths.
• Small dents will smooth out after firing.
• Case mouth deformities can be fixed by resizing.
• Primed brass is ready to load, but we recommend resizing before use.
• Primer types are generally unknown, but magnum calibers likely have magnum primers, and standard calibers have standard primers.

Blemished Products

These are new components with cosmetic or profile differences, such as:

• Light damage to brass.
• Tarnished or non-uniform projectiles.

Safety Warning

• Only load ammunition if you have proper training.
• Inspect all components before assembly.
• Improper loading and handling can cause serious injury or death.
• Always wear safety glasses when loading.

TNW Firearms is not responsible for any damages resulting from hand-loading, as it is beyond our control.

We do not ship to Alaska or Hawaii.